DirectLOGIC Programmable Logic Controllers (PLCs)

DL05/06 - Micro/Modular DL105 - Brick DL205 - Modular DL305 - Legacy DL405 - Specialty DL05 Micro PLC   Our smallest micro PLC offers six I/O combinations of AC, DC, and relay I/O, and advanced programming functions such as PID and drum sequencing. The DL05 also features: Eight inputs and six outputs, expandable to 30 I/O total 2 K program memory 4 K data memory Two communication ports Supports networking for MODBUS RTU master/slave, a DeviceNET slave option module, and an Ethernet option module 129 instructions, including four PID* loops Removable terminal block Windows-based programming software (order DirectSOFT product separately) One option card slot accepts discrete, analog I/O, high-speed counting/ pulse output and communication modules. DL06 Micro/Modular PLC   Our first micro PLC to combine fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06, you can use the same PLC panel layout for all applications from 36 to 100 I/O. DL06 features include: 14.8 K of total memory 229 instructions, including 8 PID loops Two communication ports, including RS232/ 422/ 485 capability Supports networking for MODBUS RTU master/slave, ASCII in/out, a DeviceNET slave option module, and an Ethernet option module Integrated high-speed inputs and pulse output Built-in real-time clock/calendar Optional LCD display for operator interface or maintenance troubleshooting Four option card slots accept discrete, analog I/O, high-speed counting/ pulse output and communication modules DL105 Brick PLC   The DL105 series is a fixed-I/O micro PLC with 10 inputs and eight outputs. Eight configurations are available in combinations of AC, DC, and relay I/O, as well as AC and DC power supplies. The DL105 features: 10 inputs and eight outputs 2 K program memory 384 words data memory 91-instruction programming includes time or event-based drum sequencer, timed interrupt, immediate I/O, etc. 7 amp relay outputs One RS-232C communication port Removable terminal connectors Eight I/O configurations DL205 Modular PLC   If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you'll find. In fact, all you need to do is pick out a CPU, plug it in the first slot of the base you choose, and then mix and match various modules into the available slots. The DL205 modular PLC features: Four base sizes with built-in power supply, including 12/ 24 VDC, 110/ 220 VAC and 125 VDC power sources. AC/DC discrete in/out, up to 32 points 10 A relay out 12-bit and 16-bit analog inputs and outputs Temperature inputs Data communications, including serial and Ethernet modules Counter input/ pulse output Remote I/O master and slave, Ethernet and serial remote I/O DL305 Legacy PLC   This PLC design has been marketed by various name-brand PLC manufacturers for over 24 years. It has formerly masqueraded as the General Electric Series One, the Texas Instruments Series 305, and the Siemens SIMATIC TI305. DL305 PLC features include: Four standard CPUs to choose from, including the D3-350, with PID control and two communication ports Standard CPUs programmed with handheld programmer or Windows-based software Specialty CPUs convert a DL305 system into an RTU for Optomux, Pamux, or allow BASIC programming for custom applications Five, eight, and 10-slot bases 110/ 220 VAC or 24 VDC power supply AC, DC inputs AC, DC, and relay outputs Eight or 12-bit analog input/output Specialty modules include an ASCII/ BASIC module, high speed counter, and communication interface module DL405 Specialty PLC   This product line has the widest variety of I/O modules and configurations of all our PLCs. You can build a control system with local/ distributed I/O of up to 3,500 points. Use the built-in PID instruction or specialty modules to perform cost-effective process control. Three CPUs from 6.5 K memory with 1,152 I/O to 30.8 K memory with 3,584 possible I/O, with built-in power supply are offered. The DL405 PLC also features: Three CPUs from 6.5 K memory with 1,152 I/O to 30.8 K memory with 3,584 possible I/O, with built-in power supply Three base sizes AC/ DC discrete in/out, up to 64 points Ten amp relay out 12-bit and 16-bit analog inputs and outputs Thermocouple and RTD inputs Data communications, including serial and Ethernet modules High speed counter input and pulse output Three types of remote I/O, including rack-based, module-based and our terminator field I/O Serial remote I/O master and slave modules Ethernet remote I/O master and slave base controllers Slice I/O master and slave modules